Operation process of putting on and taking off disposable isolation gown

Epidemic prevention and control are very important. What are the procedures for putting on and taking off the Disposable isolation gown?

1. Wear isolation gown: check the validity period of the isolation gown, open the package, and throw the outer package into the trash can. Unfold the collar with both hands, align the shoulder seam to expose the inside of the sleeve, hold the collar with the left hand, reach into the sleeve with the right hand, and pull the collar up with the left hand to expose the right hand. In the same way, expose your left hand and do not touch your face. Tie the neck strap. Hold both sides of the isolation gown with both hands, align it behind the back, fold it to one side, cross the waistband on the back, pull it to the front, and fasten the waistband. Wear disposable latex gloves.

2. Take off the isolation gown: untie the belt, tie a slipknot in the front, remove the gloves, wash your hands, untie the neckband, take off the isolation gown (the gown is rolled inward and thrown into the medical trash can), wash your hands, take off the mask Hat, hand washing with running water + hand disinfection.

Notice: 

1. Isolation gowns can only be worn and taken off in the specified area 

2. Check whether the isolation gown is damaged before dressing, otherwise it should be replaced 

3. The gown must completely cover the work clothes 

4. After wearing the isolation gown, only work in the specified area and not allowed to enter the clean area 

5. Isolation clothing should be replaced once a day, if it is damaged, wet, or contaminated, it should be replaced immediately 

6. It is expected that infectious substances may splash or spray out, and when the isolation gown used is not waterproof, a waterproof apron should be worn